Touch panel bonding infrared lamp

Sat, 27 Jun 2026 01:13:09 +0800

Out on the line, thermal budget isn’t a suggestion—it’s the line you can’t cross. One drift in the photoresist bake and your CD uniformity starts to wander. One cold spot during wafer drying and you’re chasing edge beads again. We built the touch-panel bonding infrared lamp to live in that reality, putting stable, localized heat exactly where the process needs it. What matters under the hood We run short-wave NIR emitters in a quartz module, so the response is fast and penetrating without hammering the substrate. Temperature uniformity across the bond zone holds at ±0.1°C, and repeatability stays tight batch after batch. The unit is cleanroom-ready—Class 1–100 compatible—and it doesn’t shed particles. It’s meant for 24/7 duty; field units have logged 5,000+ hours with less than 5% output drop. Why it fits the work we do In wafer drying and cleaning, the lamp clears moisture quickly without overheating the pattern. On photoresist, it delivers consistent soft bake and hard bake profiles—so overlay and linewidth stay under control. In packaging, it cures encapsulants and adhesives steadily, which means fewer reworks. And because the heat is applied on-demand instead of flooding the chamber, you cut energy use. The practical details you’ll want to get right Installation needs a dedicated power bus and clean, aligned mounting to keep the focal distance where it should be. The lamp performs best on flat, reflective interfaces; if the surface is textured or highly absorptive, plan on a small power offset. We include a quick-connect harness and a calibration routine that sets intensity and dwell time in minutes, then you lock the recipe for repeatability that’s audit-ready.

Bonding on Expert Warm IR Heating Solutions

Touch panel bonding infrared lamp